Certified to IEC 60947 & UL 489 standards — Explore Our Testing Protocols →

What Nobody Tells You About Siemens PLCs (Except the Price Tag)

Posted on November 13, 2026  ·  by Mateo Alvarez

I've been handling maintenance and procurement for industrial automation projects for seven years. In that time, I've made five significant mistakes that cost my company real money. The worst one? About $12,000, and it started with a single sentence: "Isn't Siemens PLC too expensive?"

If you're currently staring at a Siemens quote and wondering whether the cheaper alternative makes sense, this article is for you. I'll walk through the surface problem, the deeper reasons most people miss, the real cost I paid, and a simple framework that now guides every single purchase I make.

The Surface Problem: The Price Tag

Here's a conversation I've had at least fifty times:

"Why are we paying twice as much for a Siemens PLC when Brand X does the same thing?"

On paper, the argument is solid. A Siemens S7-1200 starter kit runs roughly $500-700. An S7-1500 can go for $1,500-3,000 depending on configuration. Meanwhile, compatible brands and domestic alternatives offer similar I/O counts, similar scan times, and similar feature lists for 30-50% less.

In October 2021, our factory needed to expand a bottling line. The budget was tight. My manager told me to cut costs where possible. I looked at the Siemens quote, then looked at a compatible alternative, and signed off on the cheaper option. I remember thinking I'd made a smart decision.

That decision cost us nearly $12,000 over the next 18 months.

The Deeper Reason: You Don't Know What a Siemens PLC Actually Is

If you ask the average maintenance tech "what is a Siemens PLC," they'll say something like "a programmable logic controller for industrial automation." That's factually correct but misses the point entirely. A Siemens PLC isn't just a box that runs ladder logic. It's a node in an ecosystem, and when you break that ecosystem, things start failing in ways you never expected.

Layer 1: It's Not Hardware. It's a Compatibility Network.

The real value of a Siemens PLC lies in how it talks to everything around it. TIA Portal integration. PROFINET communication with other Siemens devices. IEC 62443 cybersecurity certification that lets you connect to plant networks without a separate security layer. These things don't show up on a spec sheet, but they matter when you're actually running a line.

I didn't understand this. I bought a compatible PLC and saved $1,000. Then I discovered it didn't support PROFINET, which is what our existing VFDs used. So I had to buy a gateway. That was $350. Then the gateway's configuration documentation was so vague that our electrical engineer spent two full days getting it to work. That was another $1,360 in labor.

I told the procurement team I needed something "compatible with our network." They heard "works with Ethernet" and bought the cheapest option with an RJ45 port. We were using the same words but meaning completely different things. I discovered this when the VFDs refused to handshake with the new PLC and the line wouldn't start.

Layer 2: Market Share Isn't About Marketing

In 2023, Siemens held approximately 31-33% of the global PLC market (Source: Omdia, industrial automation market report, 2024; exact figures vary by methodology, but Siemens has consistently ranked first). That number meant nothing to me at the time. Now I see it differently.

When a control platform is used by a third of the world's factories, the collective troubleshooting knowledge is massive. Every weird fault code, every intermittent communication error, every "it works on my desk but not on the floor" scenario has been discussed, documented, and solved somewhere.

The brand I chose had less than 2% market share. When our bottling line threw a fault code, I found three search results online. Two were accessory sales pages. The third was in German.

Compare that to the Siemens community, where the same fault might have fifty forum threads with annotated screenshots and a PDF from 2018 that someone uploaded because they solved it once.

Layer 3: The Connected Equipment Doesn't Care About Your Budget

This is the part that really got me. A PLC doesn't live in isolation. It talks to everything.

We run six Toyota forklifts for raw material and finished goods movement. Each one has a sealed lead acid battery charger, and the charging cycles are managed by our PLC system. When I swapped in the compatible PLC, its timer logic handled the "charge complete" signal differently. Long story short, it kept charging past 100% for about three months.

Two battery banks died prematurely. Normal service life is roughly three years. We got eleven months.

Replacement cost for two battery banks: $1,800. Production downtime during the swap: roughly $7,500 in lost throughput. Plus about $600 in fried contactors and fuses from the overcharge.

Could I have caught it earlier? Maybe. But the compatible PLC had no logging function. No trend data. No way to see what the charge cycle actually looked like. I found out because a battery swelled up and the forklift wouldn't start one Monday morning.

Layer 4: The $75 Part That Took Down the Whole Line

In February 2023, a Toyota forklift starter failed. Standard procedure, right? I sent our maintenance tech to test the starter relay with a multimeter, running through the usual steps: set the meter to DC volts, red probe on terminal 87, black on ground, have someone turn the key, check for 12V at the relay.

Reading was fine. Relay clicked. Battery tested good. Fuses were intact. Three hours of troubleshooting and nothing.

The problem wasn't the relay or the starter. It was the PLC's digital output. The compatible PLC had a transient voltage dip during the output switching, lasting maybe 80-90 milliseconds. Too fast for a standard multimeter to catch. Just long enough to cause the starter relay coil to chatter, which rapidly degraded the contacts.

We replaced that $75 relay four times in three months. Each time, I paid $350 for a service visit, plus the unplanned downtime while the forklift sat dead in the aisle.

The root cause wasn't that the compatible PLC was "bad." It's that it wasn't designed to drive that specific relay in that specific circuit. And because it was outside its intended ecosystem, nobody had ever documented that failure mode. I was the first person to hit it, and I hit it four times before I figured it out.

The Cost of Not Solving This

Here's the actual invoice, line by line:

  • Compatible PLC system (cheaper option): $1,400
  • PROFINET gateway and configuration labor: $1,710
  • Two sealed lead acid battery banks, replaced early: $1,800
  • Production downtime from battery failure: ~$7,500
  • Four Toyota forklift starter relays: $300
  • Three service visits at $350 each: $1,050
  • Engineering hours diagnosing PLC output issues: ~$1,020

Total: roughly $14,780. The Siemens S7-1500 I originally wanted would have cost about $1,000 more upfront than the compatible unit.

This is the total cost of ownership (TCO) trap in its purest form. The cheap option wasn't cheap. It just moved the cost from the purchase order to the maintenance budget, where nobody was tracking it.

But the money wasn't even the worst part. After the bottling line stopped three times in six months, my manager started asking questions about every decision I made. That loss of credibility cost more than any invoice line item.

The Fix: Run TCO Before You Sign Anything

Now, every time I compare quotes for automation equipment, I run the same three-step check:

  1. List every cost, not just the unit price. Gateway hardware, configuration labor, training time, expected maintenance intervals, and downtime cost per hour. If the vendor can't give you a maintenance schedule, that's already a red flag.
  2. Ask: when this fails at 2 AM, who can I call? If there are fewer than ten English-language forum threads about the product's common faults, your local support ecosystem is probably thin. That's not a guess. That's what I check now.
  3. Check for diagnostic visibility. Can the PLC tell you something went wrong before the physical equipment fails? Siemens TIA Portal gives you full cycle logs, trend charts, and diagnostic buffers. The cheaper alternative gave me nothing. I was troubleshooting blind, and every hour of blind troubleshooting is an hour of lost production.

All three of those checks come back to the same framework: TCO isn't a spreadsheet exercise. It's a way of asking, "What happens after the box arrives?"

Last year, we finally replaced the compatible PLC with an S7-1500. We've been running it for eight months now. No starter relay failures. No battery overcharge issues. The TIA Portal dashboard shows me the charge cycle history, real-time output status, and a fault log that actually tells me what went wrong.

There's something satisfying about opening the software at 6 AM, seeing everything green, and knowing that nothing did a slow-motion failure overnight while nobody was watching. After two years of chasing problems that didn't announce themselves, that peace of mind is worth every penny of the upgrade.

If you're standing where I was in 2021, staring at a quote and wondering whether the premium is worth it, here's my honest answer: run the TCO. Not the unit price, not the feature comparison chart. The real cost of what happens after the box arrives. The math usually speaks for itself.

Pricing referenced in this article is based on vendor quotes and public price lists from January 2025. Verify current pricing before making purchasing decisions.

Mateo Alvarez

Mateo Alvarez

Mateo Alvarez is a switchboard and wiring-device analyst covering electrical panels, distribution boards, control panels, switches, industrial plugs, sockets, and outlets. He uses IEC 61439-1 and IEC 61439-2 verification evidence plus IEC 60309 ratings to examine temperature rise, short-circuit withstand, busbar capacity, rated current, creepage, clearance, and enclosure integration. He helps designers and procurement teams match assemblies and connection devices to load diversity, installation access, maintainability, and declared operating conditions.

Leave a Comment